Product Overview

Trapped gas is the number one enemy of precision injection molding － 0.1 mg of residual gas is enough to cause a product scorch mark, shrinkage cavity or strength collapse. Our nanoscale exhaust valves are actively barometric and superhard alloy sealed to vent cavity gases in 0.01 seconds while 100% blocking melt penetration. Suitable for medical micro parts, optical lens and large die-casting parts, let you completely farewell to secondary processing.

Product Features

1. Millisecond intelligent exhaust
- Dynamic pressure sensing: real-time monitoring of cavity pressure, automatic triggering of valve opening (0.2MPa micro-pressure startup)
2. Absolute seal, zero flash
- Nanometer fit seal: valve needle taper angle 58°± 0.1° with mirror face seat (Ra ≤ 0.02 μ m)
3. Minimal installation, maintenance free for life
- Die base standardization: compatible HASCO V Series, DME Q groove, FUTABA HS specification
4.An effective method of semi pneumatic ejection
5. For tools with ribs or areas forming gas traps or vaccum condition.

Product Application Scenario

1. Optical products: camera lens cover glass, light guide plate without coke mark molding
2 Medical micro-parts: Insulin needle and microfluidic chip without air bubble filling
3. High-gloss appearance parts: no weld bond for spray-free panel and mirror grille
4. Large die-casting: new energy vehicle battery tray anti-roll air